Lathe for Beginners: Centering, Pulling, Finishing — PickAClass
LK
EN
Sign in Get started
⏱ 3h 4m 📚 30 lessons 🎧 Audio version

Lathe for Beginners: Centering, Pulling, Finishing

Step-by-step videos and typical error correction

  • 💬 AI instructor
    Ask about any lesson and get a clear answer instantly, anytime.
  • 🕐 Start anytime
    No schedules or deadlines — learn at your own pace, whenever suits you.
  • 🌐 In English
    Lessons, tasks and certificate — all fully in your language.

About this course

This course is designed for those who want to take their first steps into the world of ceramic wheel throwing. You will learn the fundamental techniques for centering clay on the wheel, pulling basic forms, and finishing your pieces. Through demonstration videos and practical exercises, you will be guided step-by-step through the creative process. Integrated artificial intelligence analyzes your work videos to identify and suggest corrections for common errors, offering targeted feedback.

Course contents

6 modules · 30 lessons · 3h 4m

1 Introduction and Preparation
Set up the workspace and prepare the clay correctly. 4 lessons · 23 min
  1. Welcome to the Wheel
    Course overview and a demonstration of the complete process in timelapse.    5 min
  2. Wheel Anatomy and Safety
    Learn the parts of the wheel and how to sit to avoid back pain.    6 min
  3. The Beginner's Kit
    Introduction to essential tools: sponge, wire cutter, rib, and loop tools.    5 min
  4. Wedging the Clay
    Spiral technique to eliminate air bubbles from the clay block.    7 min
2 Centering: The Heart of Throwing
Bring the clay to the perfect center of the wheel head. 6 lessons · 41 min
  1. Securing the Clay
    How to throw and secure the clay onto the wheel head.    4 min
  2. The Coning Technique
    Raising and lowering the clay to homogenize its structure.    7 min
  3. Pressure and Stability
    Use body weight and anchored elbows to control the clay.    6 min
  4. Final Centering
    Achieving the apparent stillness of the rotating clay block.    8 min
  5. Centering Errors
    Visually identify why the clay 'wobbles' and how to fix it.    6 min
  6. Exercise: Rapid Centering
    Guided practice in centering 5 small clay blocks in sequence.    10 min
3 Opening and Creating the Floor
Create the internal cavity while maintaining stability. 5 lessons · 29 min
  1. Finding the Center
    Create the first indentation using your thumbs.    5 min
  2. The Deep Opening
    Go deep while leaving the correct thickness for the floor.    6 min
  3. Widening the Base
    Pull the clay outward to define the internal diameter.    6 min
  4. Compressing the Floor
    Prevent S-cracks by compressing the base with a sponge.    5 min
  5. AI Lab: Opening Angles
    Using AI to analyze whether the opening is centered or asymmetrical.    7 min
4 Pulling the Walls
Raise the clay vertically to create cylindrical shapes. 5 lessons · 34 min
  1. The Pinch Grip
    Positioning of the inside and outside hands for the first pull.    6 min
  2. The First Pull
    Move the volume of clay from bottom to top at a constant speed.    8 min
  3. Maintaining the Cylinder
    Techniques to prevent the shape from unintentionally widening into a funnel.    7 min
  4. Water Control
    How much water to use to prevent the clay from collapsing or sticking.    5 min
  5. Error Analysis: Irregular Walls
    AI-assisted correction of pulling videos to identify weak spots.    8 min
5 Basic Shapes and Removal
Transform the cylinder into a bowl and remove it from the wheel. 5 lessons · 27 min
  1. From Concept to Bowl
    Expand the cylinder walls outward with a fluid curve.    7 min
  2. Finishing the Rim
    Use a piece of chamois or plastic to make the rim smooth.    5 min
  3. Cleaning the Base
    Remove excess exterior clay using a wooden rib.    5 min
  4. Cutting with the Wire
    Technique for detaching the piece without deforming it.    4 min
  5. AI Feedback: Symmetry
    Verifying the symmetry of the bowl through video analysis.    6 min
6 Trimming
Sculpt the foot and refine the aesthetics of the dry piece. 5 lessons · 30 min
  1. Leather Hard
    Recognize the perfect moment to trim the piece.    5 min
  2. Recentering the Piece Upside Down
    Secure the bowl upside down on the wheel using clay lugs.    7 min
  3. Sculpting the Foot
    Using loop tools to create the foot ring and lighten the piece.    8 min
  4. Signing and Final Cleanup
    Smooth the surfaces and add your personal mark.    4 min
  5. Maintenance and Recycling
    Clean the wheel and recycle clay scraps (slip).    6 min
Final project

Your First Breakfast Set

Create a set consisting of a cylinder (mug) and a matching bowl, starting from two 500g blocks of clay.

What you'll get

  • 📜 Certificate of completion
    Add it to your LinkedIn profile
  • 💬 Personal AI tutor
    Stuck on a lesson? Ask your built-in tutor anything, any time.
  • 🎧 Audio version included
    Learn on the go — no screen needed
  • ♾️ Lifetime access
    Come back anytime, no expiry
  • 📱 Phone or computer
    Works anywhere, any device
  • 💸 14-day refund
    No questions asked
  • ⚡ Short & focused
    3h 4m of practical content

Certificate of completion

Every course you complete on PickAClass issues a credential like this — original, with its own code, verifiable by URL, and detailed about what was actually demonstrated.

P
PickAClass
Skills profile · verifiable
Document
Certificate of Mastery
This certifies that
Name Surname
has successfully demonstrated mastery of
Lathe for Beginners: Centering, Pulling, Finishing
Skills demonstrated
✓
Behavioral pattern analysis
Foundational
1.2 hrs
✓
Decision-architecture frameworks
Proficient
1.4 hrs
✓
A/B test design
Proficient
1.7 hrs
✓
Behavioral copywriting
Advanced
1.9 hrs
P
PickAClass — Name Surname
Lathe for Beginners: Centering, Pulling, Finishing
Page 2 of 2
Performance detail
Coursework summary
Lessons completed 14 / 14
Practice questions 26 / 28
Assignments submitted 4 (avg 4.5 / 5)
Capstone project Reviewed — 4.6 / 5
Total practice 6.2 hrs
Performance benchmark
Cohort rank Top 12% of 1,625
Time to completion 11 days (median: 22)
Mastery score 91 / 100
Practice-question score 94%
Skill verification Verified Skill Path
Verify this credential
pickaclass.com/certificates/PCC-2026-X4F7-AP19
Issued under the academic standards of PickAClass. Skill levels reflect assessed performance against the course's competency rubric. This is an original credential of this platform.

Reviews

No reviews yet — be the first to share your experience.

Write a review

☆☆☆☆☆
You'll be asked to sign in after sending — your draft is saved.

Frequently asked

What do I need to take this course? +

Just a phone or computer with internet. No installs, no special hardware.

How do I pay? +

By card via Stripe. We don’t store card details — Stripe handles them securely.

Can I get a refund? +

Yes — full refund within 14 days, no questions asked.

How long will I have access? +

Forever. Once you purchase, the course is yours to revisit anytime.

Will I get a certificate? +

Yes. On completion you'll receive a certificate you can add to your LinkedIn profile.

Built for learners in
Tech Design Finance Marketing Healthcare Education Hospitality Manufacturing