MIG/MAG Welding for Hobbyists — PickAClass
ET
EN
Sign in Get started
⏱ 3h 2m 📚 30 lessons 🎧 Audio version

MIG/MAG Welding for Hobbyists

Settings, Wire, Gas, Positions

  • 💬 AI instructor
    Ask about any lesson and get a clear answer instantly, anytime.
  • 🕐 Start anytime
    No schedules or deadlines — learn at your own pace, whenever suits you.
  • 🌐 In English
    Lessons, tasks and certificate — all fully in your language.

About this course

This course is designed for DIY and metalworking enthusiasts who want to learn the basics of MIG/MAG welding. Through modules covering settings, wire and gas selection, and different welding positions, you will gain practical skills for making solid joints. The course includes guided exercises to immediately apply what you've learned. An artificial intelligence system will help you assess the quality of your weld beads, providing instant visual feedback. Remember that this course provides technical training and does not replace mandatory courses, official certifications, or the advice of a qualified professional.

Course contents

6 modules · 30 lessons · 3h 2m

1 Introduction and Safety
Understand the basic principles and safely prepare the workspace. 5 lessons · 29 min
  1. What is MIG/MAG Welding
    The difference between inert and active gas welding.    6 min
  2. Course Limits and Certifications
    Clarification on hobbyist vs. professional technical value.    5 min
  3. Personal Safety (PPE)
    Essential mask, gloves, and protective clothing.    7 min
  4. Anatomy of the Welder
    Identifying the main components of the machine.    6 min
  5. Workbench Preparation
    Organizing the space and grounding.    5 min
2 Materials and Consumables
Correctly choose wire and gas based on the project. 5 lessons · 30 min
  1. Metals for Beginners
    Welding mild steel as a starting point.    6 min
  2. Wire Types and Diameters
    Choosing between solid wire and flux-core wire.    7 min
  3. Gas Cylinders and Types
    When to use Argon, CO2, or mixtures.    6 min
  4. The Flowmeter
    Adjusting gas flow rate in liters per minute.    5 min
  5. Nozzles and Contact Tips
    Maintenance and replacement of torch parts.    6 min
3 Setup and Adjustments
Set the correct parameters for smooth welding. 5 lessons · 30 min
  1. Adjusting Voltage
    Controlling heat and penetration.    7 min
  2. Wire Feed Speed
    Balancing wire speed with the set voltage.    7 min
  3. Torch Polarity
    Setup for gas vs. gasless (flux-core) welding.    5 min
  4. Metal Preparation
    Cleaning off rust, paint, and grease.    6 min
  5. The Sound of Welding
    Recognizing the correct 'sizzle' of the arc.    5 min
4 Welding Technique
Learn torch movement and positions. 5 lessons · 32 min
  1. Torch Angulation
    The importance of work and travel angles.    6 min
  2. Push vs. Pull Technique
    When to use one technique over the other.    6 min
  3. Flat Position Welding (1G)
    Performing a straight bead on a flat surface.    7 min
  4. Horizontal Welding (2F)
    Managing gravity in fillet joints.    7 min
  5. Vertical Down Welding
    Basic technique for hobbyist vertical joints.    6 min
5 Practical Exercises and AI
Create real joints and test quality with AI. 5 lessons · 35 min
  1. Exercise: Parallel Lines
    Developing consistency in hand movement.    6 min
  2. Butt Joint
    Joining two plates side-by-side.    7 min
  3. Lap Joint
    Welding one piece on top of another.    7 min
  4. T-Joint
    Creating a solid structural corner.    7 min
  5. Using the AI System
    How to photograph the bead to receive feedback from the algorithm.    8 min
6 Analysis and Troubleshooting
Identify defects and refine technique. 5 lessons · 26 min
  1. Anatomy of a Good Bead
    Recognizing ideal width, height, and fusion.    6 min
  2. Common Defects: Porosity
    Gas-related causes and how to fix them.    5 min
  3. Common Defects: Excessive Spatter
    Adjusting parameters to reduce spatter.    5 min
  4. Lack of Fusion
    Understanding when the weld is just 'sitting' on top.    5 min
  5. Post-Weld Cleaning
    Using a wire brush and grinding.    5 min
Final project

The Steel Cube

Build a perfect cube by welding 6 square plates, applying different welding positions and verifying each joint with AI.

What you'll get

  • 📜 Certificate of completion
    Add it to your LinkedIn profile
  • 💬 Personal AI tutor
    Stuck on a lesson? Ask your built-in tutor anything, any time.
  • 🎧 Audio version included
    Learn on the go — no screen needed
  • ♾️ Lifetime access
    Come back anytime, no expiry
  • 📱 Phone or computer
    Works anywhere, any device
  • 💸 14-day refund
    No questions asked
  • ⚡ Short & focused
    3h 2m of practical content

Certificate of completion

Every course you complete on PickAClass issues a credential like this — original, with its own code, verifiable by URL, and detailed about what was actually demonstrated.

P
PickAClass
Skills profile · verifiable
Document
Certificate of Mastery
This certifies that
Name Surname
has successfully demonstrated mastery of
MIG/MAG Welding for Hobbyists
Skills demonstrated
✓
Behavioral pattern analysis
Foundational
1.2 hrs
✓
Decision-architecture frameworks
Proficient
1.4 hrs
✓
A/B test design
Proficient
1.7 hrs
✓
Behavioral copywriting
Advanced
1.9 hrs
P
PickAClass — Name Surname
MIG/MAG Welding for Hobbyists
Page 2 of 2
Performance detail
Coursework summary
Lessons completed 14 / 14
Practice questions 26 / 28
Assignments submitted 4 (avg 4.5 / 5)
Capstone project Reviewed — 4.6 / 5
Total practice 6.2 hrs
Performance benchmark
Cohort rank Top 12% of 1,625
Time to completion 11 days (median: 22)
Mastery score 91 / 100
Practice-question score 94%
Skill verification Verified Skill Path
Verify this credential
pickaclass.com/certificates/PCC-2026-X4F7-AP19
Issued under the academic standards of PickAClass. Skill levels reflect assessed performance against the course's competency rubric. This is an original credential of this platform.

Reviews

No reviews yet — be the first to share your experience.

Write a review

☆☆☆☆☆
You'll be asked to sign in after sending — your draft is saved.

Frequently asked

What do I need to take this course? +

Just a phone or computer with internet. No installs, no special hardware.

How do I pay? +

By card via Stripe. We don’t store card details — Stripe handles them securely.

Can I get a refund? +

Yes — full refund within 14 days, no questions asked.

How long will I have access? +

Forever. Once you purchase, the course is yours to revisit anytime.

Will I get a certificate? +

Yes. On completion you'll receive a certificate you can add to your LinkedIn profile.

Built for learners in
Tech Design Finance Marketing Healthcare Education Hospitality Manufacturing